Hi-Fi Floorstanding Speaker – BOREA BR10

The flagship BR10 speaker is the highest-performing model of the BOREA range. The use of 8” drivers in the bass register extends the bandwidth and increases power handling, while keeping the TRIANGLE sonic qualities.

The BR10 has a three-way design, with a 25mm EFS tweeter and a 6” midrange driver with a cellulose pulp membrane. In the low-frequency range, the new 8” bass drivers use a membrane in fiberglass coupled with a powerful motor. As a result, the low range is smooth, fast and controlled.

It introduces a new architecture, with a separate crossover system and a dual terminal for bi-wiring or bi-ampflication.

Featuring a high sensitivity of 92dB, the BR10 can be combined with most powerful amplifiers on the market. With exceptional low-frequency performance and high power handling of 200W RMS, these speakers are suitable for rooms larger than 30m2. Versatile, they can be used in both Hi-Fi and home theater setups.

Recommended room size

The BR10 is recommended for listening rooms with an area greater than 40 m2.

Find a model in the Borea range that suits your listening room:

• < 20m2 : BR02

• from 10 to 35m2: BR03

• from 15 to 35m2: BR07

• from 15 to 50m2: BR08

• > 30m2: BR09

• > 40m2: BR10

Amplifier and Power Handling

Recommended Amplifier power : from 75 to 350 Watts (8 Ohms)

Power Handling : 200W

* The power handling of a speaker is the average continuous power that the speaker can accept without damaging the drivers. You can use an amplifier more powerful than the permissible speaker power by limiting the volume to 70% of the maximum capacity. Conversely, an amplifier that is too underpowered will clip and create distortion, which can also damage the speakers if it is used beyond its capacity.

Speaker Specifications

• Type : Floorstanding speakers with front bass reflex port

• Crossover : 3 Ways

• Sensitivity (dB/W/m) : 92dB

• Bandwith (+/-3dB Hz) : 30Hz-22 000Hz

• Nominal impedance : 8Ω

• Minimum impedance : 3Ω

* The impedance of a speaker can be simplified as an electrical resistance. The lower is the impedance of the speaker, the more current the amplifier will have to deliver.

- Nominal impedance is measured at a frequency of 1kHz

- Minimum impedance is measured at low frequencies.

TRIANGLE loudspeakers never fall below 3 Ohms, which means they can be used with almost all Hi-Fi and Home Cinema amplifiers.

Driver informations

4 Drivers :

• 1 x 25mm silk dome tweeter (EFS)

• 1 x 16cm midrange with natural cellulose pulp membrane

• 2 x 21cm woofer with fiberglass membrane

Crossover

Crossover Frequencies : 310Hz -3900 Hz

Weight & Dimensions

Speaker dimensions

• Width : 245 mm

• Height : 1110 mm

• Depth : 380 mm

Dimensions with pedestal (W x H x D): 300 x 1145 x 435 mm

Box dimension (per unit) (W x H x D): 400 x 1230 x 520 mm

Weight

• Net weight : 29,5 kg

• Gross weight : 34,5 kg

Accessories

• Magnetic grille protection

• Steel spikes for rug/carpet type surfaces

• Rubber tips for rigid surfaces

Triangle Borea BR10